| Top Layers |
| Top layers of each Dempar wood-laminated parquet is carefully selected and produced from the most efficient forests in the world. At each step of production, wood species, quality, age and resistance are systematically controlled by our experienced employees. The thickness of top layer is 4 mm. When it is necessary, it can be calibrated many times, and it has a feature of easy cleaning. |
 |
| Bottom Construction Layer |
We use a special high quality, water resistant 10 mm (for 3 Strips) and 12 mm (for Plank) plywood at the bottom construction layer. Both sides are calibrated. The plywoods are produced by our special production unit. These are one of the most important features that improves the quality and lifetime of Dempar Parquet. Plywood bottom layer parquet is advised for the floor heating systems.
3 Strip Bottom Construction Layer |
Plank Bottom Construction Layer |
|
| |
| Lacquer |
| Dempar wood-laminated parquet have UV lacquer on the top layer. It is totaly suitable for the enviroment and it does not contain any chemical that can harm environmental health. |
| |
| Gluing |
| The glue that we use between bottom and top layer is a very special glue we import from Europe. It is a water-based glue. In order to raies our parquets resistance graphics to highest rate, we measure the resistance of the glue under different conditions. |
| |
| The Prima, Natural and Standart Selection |
 |
|
Prima production is composed of lamels that have the same colours tone. Prima has a uniform colour. |
|
|
 |
|
Naturel production is more economical is comparison to prima. Lamels have slight differences in colour tones, and any include some small knots on the surface. As it can be understood from its name, it is very popular and preferred product because it shows the natural beauty of the wood. |
|
| |
 |
|
Standart production is made from the part of the timber that is close to
sub-wood. In this product the color tones between the lamels can be very
different and the diameters of knots are wider than natural products. This
production is the most economical type. |
|
| |
| Plank Selection |
| We have two types of selection in Plank products which are Straight Grain and Radial Grain. |
 |
|
Straight Grain; It is seen that the veins of the wood are going in horizontal
direction. |
|
| |
 |
|
Radial Grain; It is seen that the veins of the wood are at radial shapes. |
|
| |
| Standard Measurements |
| 3-Strip : | | 14 x 197 x 2180 mm |
| Plank : | | 16 x 150-140 x 1070 mm
16 x 150-140 x 2180 mm |
|
Company Profile
